Antique Cockshutt / CO - OP Tractor Parts

                                     
                         
   
Steering Joint Repair Kit  
       

Steering Joint with Yoke, Pins & Grease Fitting

Fits Cockshutt 20, 30, Co-Op E3, 560 & 570, Replaces #T8501 & #TO20967 (7/8 inch diameter shaft on both ends)
Note: Check measurements before ordering


ABC166
        $66.30      
 
Char-Lynn Power Steering Parts  
                   
       

Slip Fit or Economy Coupler
(For Power Steering Conversion)

For IHS554 & IHS555 Generators
ABC380
        
       
        $137.00    
Original
ABC497
         $29.40    
Economy
 
     

Torque Generator
(Standard)

For when pulling a wagon etc... (Torque Output at 1000 PSI = 7000 inch lbs., Rated Operating Pressure = 1000 PSI, Maximum Operating Speed at 3 GPM = 108 RPM, Recommended Fluid Input = 2.5 to 3 GPM)
IHS554
      
         
    $438.20    
See above

Torque Generator
(Heavy Duty)

For when a front loader is used (Torque Output at 1000 PSI = 1100 inch lbs., Rated Operating Pressure = 1000 PSI, Maximum Operating Speed at 3 GPM = 65 RPM, Recommended Fluid Input = 3 to 4 GPM)
IHS555
     
      $449.50      
       

Port Block

Need only if above Torque Generators are purchased

IHS673
 $81.25
               

Power Steering Priority Flow Control Valve

Fits Cockshutt E3, 30, 35, E4, E5, 40, 50, 560, 570 tractors w/ LIVE hydraulics (3/4" inlet & return; 1/2 pressure port)
NOTE: ELIMINATES BELT DRIVEN PUMP, PULLEYS & BRACKETS. ENABLES YOU TO USE YOUR LIVE HYDRAULIC PUMP TO OPERATE THE POWER STEERING. PRE SET AT 1500 PSI, ADJUST TO YOUR APPLICATION
IHS740
      $198.95
               

Retainer
(For Front Wheel Felt Seal)

Fits Cockshutt 20, Replaces #T11307 MADE IN USA
COS017
     $21.60
 
Tie Rod Parts
 

Outer Tie Rod End
(All with Adjustable Wide Front End)

Fits Co-Op E3, E4 & E5, Cockshutt 30, 35, 40, 50, 560 & 570, Replaces Cockshutt #TF010801
ABC390
$45.95
                         

Inner Tie Rod End
(All with Adjustable Wide Front End)

Fits Co-Op E3, E4 & E5, Cockshutt 30, 35, 40, 50, 560 & 570, Replaces Cockshutt #TF010800 & #TF010802
ABC392
$33.95
     

 

Fits Cockshutt models, (1-13/16 inch (Base) X 7/8 inch (Height) X 5/8 inch (Hole I.D.)

ABC368
 $2.95
               

Dust Cover (Seal)
For Steering Drag Link Front Ball Joint

Fits Cockshutt models, BASE X HEIGHT X HOLE I.D. --- 1-7/16" X 1/2" X 1/2"
FDS336
 $3.95
               

Tie Rod Boot

Fits Cockshutt models models 1-1/2" X 11/16" X 9/16"
JDS736
$3.95
     

Tie Rod Boot

Fits Cockshutt models, (1-13/16 inch Base X 9/16 inch Height X 5/8 inch Hole I.D.)

   
ABC369
 $2.95      
                         
   

Tie Rod Boot

Fits Cockshutt models, (1-9/16 inch Base X 1 inch Height X 1/2 inch Hole I.D.)
ABC371
 $3.25      
                     

Dust Cover (Seal)
 For Steering Drag Link Front Ball Joint

Fits Cockshutt models, BASE X HEIGHT X HOLE I.D. --- 1-5/8" X 3/4" X 9/16"
FDS337
 $3.95      
                     

Tie Rod Boot

Fits Cockshutt models, (1-15/16 inch Base X 3/4 inch Height X 3/4 inch Hole I.D.
ABC370
 $3.50
               

Tie Rod Boots

(1.200" base, .475" tall, .500" hole)
FDS336
 3.95
               
Rear Axle Parts    
 

Rear Axle Outer Oil Seal

Fits: Co-Op E3b & Cockshutt 30 Replaces #T9431
COS024
   29.95    
                       
 
 
Page 1