 |
 |
 |
 |
 |
Antique Cockshutt / CO - OP Tractor Parts
Note: Check spark plug specifications
before ordering as some models may use
more than one type
Spark Plug Autolite #386
Fits Co-Op #1 & Cockshutt 20, 540, 550, 60HC, 70HC, 770, 1550 & 1555
Autolite #386, medium hot, standard tip/resistor, 18 mm thread diameter, 1/2 inch reach, 7/8 inch hex) Champion Plug Cross Reference D10, K13, D14, M14, RD14, K15J, D16, D16J, RD16, UD16, D21, D89D
Spark Plug Autolite #295
Fits Co-Op #2 & #3, Autolite #295, medium hot, standard tip/non-resistor, 14 mm thread diameter, 3/8 inch reach, 13/16 inch hex) Champion Plug Cross Reference J8, J8C, UJ8
Spark Plug Autolite #306
Fits Co-Op E3, E4, E5, & Cockshutt 30, 40, 50, Autolite #306, medium hot, standard tip/resistor, 14 mm thread diameter, 3/8 inch reach, 13/16 inch hex) Champion Plug Cross Reference RJ8, RJ8C, J11, J11J, RJ11, UJ11G
Spark Plug Autolite #405
Fits Cockshutt 1600, 1650, 1655, 1750, 1800, 1850 & 1855 (All LP gas) Autolite #405, medium hot, std. tip/resistor, 14 mm thread diameter, 3/4 inch reach, 13/16 inch hex, Champion Plug Cross Reference N6, N6C, RN6, N8, RN79G
Spark Plug Wire Set
w/ Copper Wires & Straight Boots
Fits Cockshutt E2, E3, 20, 30, 540, 550 & OTHER MODELS USING STRAIGHT BOOTS
NOTE - Spark Plug Wire Sets with copper wire can not be used with electronic ignition conversion kits.
Universal 4 and 6 Cylinder Spark Plug Wiring Set
w/ 90 Degree Boots
Fits 4 Cylinder tractors
(Stainless steel wires)
Spark Plug Wire Set
FITS THE FOLLOWING W/ FLATHEAD CONTINENTAL ENGINE & DISTRIBUTORS: Co-Op E2, Cockshutt 20 & 540; Also fits Silver King model #42 (Copper wire)
Spark Plug Wire Set
Fits: Co-Op E3, Cockshutt 30, 35 & 550, Replaces #TO7528, TO7529 & TGO7624 (Waterproof neoprene)
6 Volt Distributor Coil
(Metal Housing & Metal Bracket)
Fits Cockshutt models
12 Volt Distributor Coil
Fits Cockshutt models
HOT Coil (55000 Volts)
For 12 Volt systems (Maximum voltage for faster starting, Reduces plug fouling for longer plug life)
Distributor Cap
(For Autolite Distributor)
Fits Cockshutt 20, 30, 35 & Co-Op E3
Distributor Cap
(For Delco Distributor with clip held cap thru 1963)
Fits Cockshutt 540 &550
Distributor Cap
(For 6 Cylinder Delco Distributor with clip held cap thru 1963)
Fits Cockshutt 540, 570, Replaces MAO-602
Dust Cover with Gasket
(For EARLY Delco-Remy Distributor w Clip Held Cap)
Fits Cockshutt 540
Distributor Cap Spring Clip
FITS THE FOLLOWING W/ DELCO DISTRIBUTOR & CLIP HELD CAP: 540, 550 & 570 Replaces #MA597, #MA599 (bracket) (2-1/4" overall length)
Terminal Insulator Assy
FITS THE FOLLOWING W/ DELCO DISTRIBUTOR: Cockshutt 540 Replaces #MA466, #MA467, #MA625, #MA789, #MA790, #MA797, #MA798 & #MA799
Terminal Insulator Assey
FITS THE FOLLOWING W/ DELCO
DISTRIBUTOR: Cockshutt 550 & 570, Replaces #MA625, #MA626, #MA627, #MA628, #MA624, #MA629 & #MA467
Rotor Button
Fits: Same as ABC310 above Replaces #T-7691 & TG0-7746
Rotor Button
Fits: Same as ABC018 above Replaces #609119A
Universal Voltage Resistor
(2 Terminal Style)
Fits Cockshutt Models, Used to reduce voltage from 12 Volt to 6 Volt, Replaces #CR107
Ignition Tune-Up Kit with Rotor
For Autolite Distributor on Cockshutt 20, 30 & 35, 40 & 50 (1949 & up), Co-Op E3, E4 & E5, 550 (1946 & up)
Ignition Tune-Up Kit
(For Delco Distributor w/ clip held cap) fits Cockshutt 540, 550, 560 & 570
Ignition Tune-Up Kit
Fits Cockshutt: 70, 99, 770, 880, Early 1800
