Equipment Repair, Preserving America's Memories One Tractor at a Time

International Harvester Tractor Parts
Loading
Carburetors and Fuel System Parts                                     view cart
Carburetors are limited to replacement ONLY, NO REFUND, No replacement will be given if rust, dirt, etc. is found in the carburetor or if it has been taken apart.

Farmall Cub Carburetor

International - Fits: Cub, 154 (up to engine sn 312389)

Replaces: 251234R92, 251234R93, 251234R91, 63349C91, 364579R91, 251234R94 Carb Mfg #'s - 251234R94, Carburetor's w/ 'IH' on float bowl: 251293R91, 364579R91, 405004R91, 63349C91

This Cub carburetor is a new IH replacement. We’ve designed this tractor carburetor to look like the original IH Cub Carburetor. Our tractor carburetor features a 15/16” throttle bore. This Cub tractor carburetor does not include the choke lever. Choke lever (IHS240). The carb mounting holes measure 1-13/16" center to center.--Carburetors are limited to replacement ONLY, NO REFUND, No replacement will be given if rust, dirt, etc. is found in the carburetor or if it has been taken apart

 

IHS738 $ 295.00 add to cart      

Farmall H Complete New Not Rebuilt Carburetor

International - Fits: H, HV, I4, O4, OS4, U4, W4;
This Replaces: 50981DA, 50981DB, 50981DC, 50981DD Carb Mfg #'s - 45108DB, 45108DC, 45108DD, 45108DE, 50981D, 50981DD, 6212DB (casting #), 6213DB (casting #)
** Carburetors are limited to replacement only, no refunds.
****** No replacement will be given if rust, dirt, etc. is found in the carburetor or if it has been taken apart.
Our IHS3383 is made exactly like the original, all the original parts interchange.
PLEASE MAKE SURE YOU COMPAIR YOUR CURRENT CARB NUMBER TO THE ONES LISTED AND MAKE SURE THEY MATCH BEFORE ORDERING.

IHS3383 $285.00 add to cart      

Choke Lever

International - Fits: Cub, Cub, Cub Loboy

Replaces: 351324R1

Does not fit 154, 184 or 185 as these tractors use a choke cable not a rod.

New Zenith Carburetor
USA Made

International - Fits: Cub, 154 (WITH ENGINE SERIAL NUMBER 312390 and up)

Replaces: 71523C93, 70949C92, 70949C91,

Carb Mfg #: 13781, 13794

On older Cub tractors, you may need to use 2 carb gaskets to clear the butterfly. Use ABC543

The throttle bore measures 1-1/64". The carb mounting studs measure 1-13/16" center to center. choke air horn (air inlet) measures 1-5/8" OD. The fuel inlet measures 1/8" NPT. The carb mounting flange gasket is included.

IHS240
$ 28.95 add to cart IHS417 $ 341.25 add to cart

Marvel Schebler Carburetor

International - Fits: A, AV, B, BN, C, Super A, Super C

Replaces: 372985R92, 352047R91, 69404D, 69401D, 69402D

Carb Mfg #'s - : 9749, 9752, TSX156, TSX157, TSX319

New, Marvel Schebler style replacement carburetor. Mounting studs measure 2-3/8" center to center, throttle body throat measures 1-1/16" diameter, choke air horn (air inlet) measures 1-1/2" OD, fuel inlet measures 1/8" NPT. Mounting flange gasket is included

IHS420 $ 289.95 add to cart      

New Zenith Carburetor

International - Fits: A, A-21, A-I, A1, AV, AV-1, B, BN, C, Super A, Super C, 100, 130, 200, 230

Replaces: 373957R91, 373959R91, 373961R91, 372098R93, 366462R94, 366306R91, 366306R92, 366306R93, 373962R91, 373978R91, 354892R92, 354892R91, 372983R91, 354892R93, 52499DA, 385507R91, 385608R91, 48616D, 362385R91, 362384R91, 69402D, 69401D, 69404D, 377600R91, 375560R91, 52499DC, 52499DD, 52499DE, 352047R91, 372985R92, 355485R92, 356901R91, 356902R92, 355485R91, 3454892R92, 352377R92, 354184R93, 354185R92, 52499DB

Carb Mfg #'s - ZENITH: 10514A, 8808, 8928, 9167, 9749, 9752, 10386, 10522, 11115, 11188, 11340, 11704, 12115, 12122, 12123, 12225, 12285, 12475, 12522, 12613, 14007, ; ZENITH REPLACING MARVEL SCHEBLER : TSX156, TSX157, TSX171, TSX198, TSX319, TSX333, TSX348, TSX730, TSX744, TSX926, ; ZENITH REPLACING CARTER: UT, UT2257S, UT26125, UT652, UT734S, UT771SA

Make sure that your carburetor manufacturer number is in the list that this fits!! **Fits IH. applications only**--The carb mounting studs measure 2-3/8" center to center. The throttle body throat size measures 1" diameter. The choke air horn (air inlet) measures 1-5/8" OD. The carb mounting flange gasket is included. The fuel inlet is 1/8" NPT.

IHS905 $ 415.65 add to cart      

Downdraft Carburetor

International - Fits: 2300A, B-250, B-275, B-276, B-414, 354, 434, 444, 2444, 3414, 3444, Forklift: 7000 (with BC-144 gas engines)

Replaces: 1970964C1, 3044193R92, 3063945R91

Carb Mfg #'s - 3044193R92, 3063945R91, 341V, C1751, C1759, C1836, VN, VNN

This carburetor looks different than the original, but works great. (No Accelerator pump used). This is a down draft carburetor. "Zenith" is cast into the carb housing. The carb mounting studs measure 2-9/16" center to center. The throttle body throat size measures 1-1/8". The choke air horn (air inlet) measures 2-5/16" OD. The fuel inlet 90 degree hose barb accepts 5/16" hose. The carb flange mounting gasket is included.---Carburetors are limited to replacement ONLY, NO REFUND, No replacement will be given if rust, dirt, etc. is found in the carburetor or if it has been taken apart.

IHS377 $ 498.50 add to cart      

New Zenith Universal Replacement Carburetor

International - Fits: A, A-I, A1, AV, AV-1, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 330, 340, International Utility: 340, 404, Farmall Rowcrop: 404, Crawler: 500, T340, T4, T5

Replaces: 352047R91, 96401D, 372985R92, 69402D, 69404D

Carb Mfg #'s - ZENITH : 3199, 9705, 9706, 9707, 9749, 9752, 9797, 9804, 10514, 11115, 11141, 11142, 12115, 12122, 12225, 12262, 12285, 12401, 12475, 12522, 12566, 12749, 12773, 12911, 14544, 16232, ; Marvel Schebler : TSX114, TSX120, TSX138, TSX154, TSX155, TSX156, TSX157, TSX159, TSX171, TSX186, TSX188, TSX198, TSX21, TSX212, TSX231, TSX248, TSX253, TSX272, TSX28, TSX287, TSX30, TSX305, TSX308, TSX309, TSX312, TSX333, TSX34, TSX346, TSX347, TSX348, TSX359, TSX36, TSX361, TSX361A, TSX363, TSX380, TSX400, TSX403, TSX405, TSX406, TSX418, TSX42, TSX421, TSX422, TSX43, TSX447, TSX470, TSX472, TSX474, TSX486, TSX507, TSX513, TSX541, TSX55, TSX60, TSX606, TSX665, TSX668, TSX670, TSX69, TSX701, TSX730, TSX74, TSX744, TSX748, TSX809, TSX815, TSX827, TSX860, TSX88, TSX90, TSX926

New, UNIVERSAL Zenith replacement --- 2-5/16" to 2-3/8" CC stud holes (Because of the smaller dia studs that are included) --- Throttle Shaft Length = 4.88" --- For some applications you must trim throttle shaft to clear the block. Need a carb kit for this carb? Order number ABC318. --- Fits the listed carbs Has 1-1/8" throttle bore. --- Carburetors are limited to replacement ONLY, NO REFUND, No replacement will be given if rust, dirt, etc. is found in the carburetor or if it has been taken apart.

ABC223 $ 416.00 add to cart      

New Repalcement International Tractor Carburetor

Fits International - Fits: 454, 464, 504, 544, 574, 656, 666, 674, 686, Industrial: 100C (Crawler), 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 3400A, 3500A, 3514, 4000 (Forklift), 4500A, 4500B;
Replaces: 381945R93, 396737R93, 396738R92, 396966R91, 398069R91, 398069R92, 399355R93, 400348R91, 401379R91, 404731R91, 405530R91, 405869R94, 535134R91, 535135R91

Also Fits IH Combines - Fits: 101, 105, 122, 127, 141, 151, 181, 203, 303, 403, 503, 615
Cotton Picker: 214, 214A, 220, 220A, 414, 416, 420, 422,
Field Harvester: 20C, 36, Windrower: 375

•New Zenith carburetor, not rebuilt •2-11/16" center-to-center mounting studs •1.299" throttle bore •2.040" housing O.D. for air cleaner hose Note: Carburetors are limited to replacement only. No refunds, no replacement will be given if rust, dirt, etc. is found in the carburetor or if it has been taken apart.

ABC3453 $ 432.25 add to cart      

Venturi

International - Fits: H, HV, I4, O4, OS4, U4, W4

All with with carburetor # 45108D, 45108DA, 45108DB, 45108DC, 45108DD or 50981D, 50981DA, 50981DB, 50981DC, 50981DD

Replaces: 64986D, 45118D

Zinc, like original.

Zenith Main Jet Adjusting Needle

International - Fits: A AV, B, BN, C, Super A, Super AV, Super AV-1, Super C, 100, 130, 200, 230

Replaces: B51326, 53786D

Zenith - Replaces: Fits the following carbs: 61, 68, 161, 162 Series: 71-21

3/8 x 24" Thread

IHS2670 $ 34.95 add to cart ABC564 $ 24.60 add to cart

Carburetor Fuel Line Fitting With Strainer

International - Fits: F12, F14, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O12, O14, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super WD9, Super WDR9, T6, T9, TD6, TD9, W12, W14, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 300, 350, 400, 450, 460, 560, 600, 606, 650, 656, 660, 686, 706, 756, 766, 806, 826, 856, 3616 (WITH INTERNATIONAL CARBURETOR), W6TA (DIESEL, WITH INTERNATIONAL CARBURETOR), Wheatland: 400, 450 (WITH INTERNATIONAL CARBURETOR)

Replaces: 29902DX

FITS FOLLOWING IH CARBS : 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA, F8

1/4" PIPE TO 5/16" FLARE

IHS972 $ 17.99 add to cart      

International Carburetor Elbow With Strainer Assembly

International / Farmall - Fits: Following with listed Carter, Marvel Schebler & Zenith carbs, using 5/16" O.D. fuel line: 100, 130, 140, 200, 230, 240, 2424, 2444, 330, 340, 3514, 404, 424, 444, 504, A, B, C, Super A, Super C, T340, T4, T5, Following with listed Zenith carbs only, using 5/16" O.D. fuel line: 154, 184, [ Cub, Cub Loboy (Engine Sn# 312390 & up, w/ Zenith Carb.) ], Following with listed Zenith carbs only, using 5/16" fuel line: 185; Replaces: 354827R91, 53796D, 69938D Marvel Schebler -
Replaces: 67-528, C150-17
Carb Mfg #'s - 11115A, 1247S, 8928, 9167, 9722, 9749, 9750, 9751, 9752, 10386, 10441, 10498, 10514, 10522, 11188, 11228, 11338, 11339, 11340, 11704, 11776, 11882, 12122, 12123, 12225, 12285, 12475, 12522, 12613, 12632, 12685, 12758, 13781, 13794, 14007, 14544

•This Carburetor Elbow with Strainer Assembly fits the models listed when they are equipped with a 5/16" O.D. fuel line. •1/8" male threads •Fits Carter, Marvel Schebler & Zenith carburetors. •Please check the fuel line size before ordering! •Use caution when threading fuel line in, as it is NOT RETURNABLE if threads have been cross threaded

IHS1124 $ 26.35 add to cart      

IHS966 Elbow

Carburetor Elbow With Strainer

International - Fits: A, B, C, Super A, Super C, T340, T4, T5, 100, 130, 140, 154, 184, 185, 200, 230, 240, 330, 340, 404, 444, 504, 2444, 3514 (with listed Zenith carbs ONLY)

Replaces: 53796D, C150-17, 354827R91

Carb Mfg #'s - 11115A, 1247S, CARTER CARBURETORS, 8928, 9167, 9722, 9749, 9750, 9751, 9752, 10386, 10441, 10498, 10514, 10522, 11188, 11228, 11338, 11339, 11340, 11704, 11776, 11882, 12122, 12123, 12225, 12285, 12475, 12522, 12613, 12632, 12685, 12758, 13781, 13794, 14007, 14544

Will fit models listed when they are equipped with a 1/4" fuel line.

IHS966 $ 26.35 add to cart      

Throttle Body Shaft Repair Bushing

Repairs worn throttle bodies using 1/4" throttle shafts

For small bowl Marvel Schebler carburetors

International - Fits: A, A1, AV, B, BN, C, Super A, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, Early, For small bowl Marvel Schebler carbs), 2404, Crawler: 500, T340, T5, Power unit: U2

Carb Mfg #'s - TSX116, TSX154, TSX159, TSX305, TSX422, TSX470, TSX486, TSX593, TSX670, TSX701, TSX706, TSX815, TSX844, TSX879, TSX912, TSX931, TSX986, TSX990

Replaces T818

Must ream to size. Drill to size by using Letter V (.377) Bitt For Cast Iron or use 3/8 (.375) for Aluminum.
0.383 OD, 0.247 ID, LENGTH 0.501
Install With Sealent

Repairs worn throttle bodies using 1/4" throttle shafts.

ABC513 $ 2.55 add to cart      

Throttle Body Lower Repair Bushing

Lower bushing, 1/4" shafts. OD .323", ID .247", L .471".

Must ream to size. Drill to size by using Letter O (.316) Bitt For Cast Iron or 5/16 (.312) for Aluminum.
Install With Sealent

Repairs worn throttle bodies using 1/4" throttle shafts.

T819 $ 3.75 add to cart      

Throttle Shaft For Original British Zenith Carburetor VN, VNN, VNP

International - Fits: 2300A, 2300A, B-250, B-275, B-414, 276, 354, 434, 444, 2300, 2444, 3414, 3444 (WITH BRITISH ZENITH CARB), Forklift: 7000 (WITH BRITISH ZENITH CARB)

Replaces: 3047470R1

Carb Mfg #'s - C1751, C1759, C1836, VN, VNN, VNP

IHS968 $ 32.95 add to cart      

view cart
 
Home Page          
Contact Us          

Need Help Ordering Parts?

Call Us:

1-888-839-5778
e mail kuhns@antiquetractorsrus.com


 

More Tractor Parts. Click Here!
Click Here For More Parts
We Have Implement, Equipment and Maintenance Parts For all Makes and Models.