Equipment Repair, Preserving America's Memories One Tractor at a Time

International Harvester Tractor Parts
Loading
Hydraulic Pumps, Parts and Accessories                           view cart
 

Live Hydraulic Pump

International - Fits: H (with F-300 front inner/outer timing cover), Super H, Super W4

Replaces: 363779R94

10 GPM @ 1600 RPM, 1200 PSI; dimensions = 3 7/8" flange to flange.

Live Hydraulic Pump

International - Fits: M (with 400 Gas inner/outer timing covers), Super M, Super MTA, Super W6, Super W9, Super WD9, T6, W9, WD9 (must use Super W9, Super WD9 inner & outer timing covers), 400, 450 (GAS), 600, 650.

Replaces: 357214R92, 128190C91, 362175R94, A-128190C91

12.6 GPM @ 1450 RPM, 1200 PSI. Top bolt pattern 3-3/8" center to center. Bottom bolt pattern 2-5/8" center to center.

IHS278 $ 999.95 add to cart IHS284 999.95 add to cart

International Hydraulic Pump

Fits International Tractors1086, 1486, 1586, 3088, 3288, 3688, 786, 886, 986

Replaces 120114C91, 120114C92, 1949302C1

 

International Hydraulic Pump

Fits International Tractors 100, 1026, 1066, 1206, 1466, 1468, 1566, 1568, 21026, 330, 340, 460, 504, 544, 560, 606, 656, 660, 706, 756, 766, 806, 826, 856, 966, C135 ENG, C153 ENG, C200 ENG, C221 ENG, C263 ENG, C291 ENG, C301 ENG, C310 ENG, D166 ENG, D188 ENG, D236 ENG, D239 ENG, D282 ENG, D310 ENG, D358 ENG, D360 ENG, D361 ENG, D407 ENG, HYDRO 186

Replaces 1949296C1, 70933C91

1701-1012 $ 311.85 add to cart 1701-1011 $ 427.35 add to cart

New Hydraulic Pump Front Mount

Fits International Industrial with power shift: 100, 100C, 100E, 125, 125C, 125E, TD7C, TD7E, TD8C, TD8E;

OEM Replaces: 625000C91

Note: Warranty will be voided if contaminated oil or debris is found in the pump.•5-3/4" center-to-center (2) 1/2" O.D. mounting holes •0.860" spline diameter for 7/8" coupler •13 splines •Can be adapted to many other applications. •Return port thread size: 1-5/8"-12 x 37° flare •Pressure port thread size: 1-3/16"-12 x 37° flare •Approximately 23 gallons per minute

ABC3858 $ 425.00 add to cart      

Hydraulic Pump Drive Gear

International - Fits: 766, 786, 826, 886, 966, 986, 1066, 1086, 1456, 1466, 1486, 1566, 1568, 1586, 3088, 3288, 3688, Farmall Rowcrop: 756 (sn 17636 and up), International Utility: 756 (sn 8425 and up), 856 (sn 9493 and up), Farmall Rowcrop: 856 (sn 27287 and up), Hydro: Hydro 100

Replaces: 405181R1

25 degree tooth angle, 19 teeth.

IHS158
$ 48.95 add to cart      

Hydraulic Touch Control Block Gasket and O-Ring Kit
USA Made

International / Farmall - Fits: C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200;

Replaces: 128999, 235760, 238-5114, 238-6326, 253070R1, 350429R1, 350646R1, 350651R1, 350657R1, 350658R1, 350667R1, 350672R1, 350684R1, 350706R2, 350706R3, 352024R2, 352221R1, 353771R2, 353771R3, 354007R91, 354007R92, 354007R93, 354007R94, 354007R95, 354007R96, 354354R3, 355352R1, 355966R1, 355967R1, 461173R1, 9706714, 70935118, 75285739, 86553262, 86629543 •There are 38 pieces in this gasket and O-ring kit. •Includes (2) hydraulic head gaskets (for 3/8" and 7/16" bolt holes) •Fits all hydraulic touch control blocks for tractors listed

IHS3020 $ 98.50 add to cart      

Hydraulic Touch Control Block Gasket and O-Ring Kit

International / Farmall - Fits: Cub, Cub Loboy; Replaces: 128999, 13727D, 238-5113, 238-5324, 238-6326, 252738R1, 253070R1, 253070R1, 254691R1, 350658R1, 350667R1, 350672R1, 350684R1, 351983R1, 351989R4, 351989R6, 351989R7, 352004R1, 352024R1, 352034R1, 352034R2, 352221R1, 354008R93, 354008R94, 354008R95, 355966R1, 355967R1, 355967R1, 360713R91, 360713R92, 411205R1, 411205R2, 461173R1, 49861, 843092, 9672467, 9706714, 75285739, 86505727, 86553262, A175513 This is a Steiner exclusive kit that fits both early and late touch control blocks. Some applications may have extra O-rings and/or washers. There are 24 pieces in this gasket and O-ring kit.

IHS3027 $ 42.50 add to cart      

Cub Hydraulic Pump Gasket, O-Ring and Seal Kit
USA Made

International / Farmall - Fits: [ Cub, Cub Loboy (both with Pesco hydraulic pumps) ];

Replaces: jam nut: 124925, gaskets: 352034R2, pin seal: 355882R1, washers: 355047R1, 355199R1, quad ring: 510185, 353828R1, key: 114494, 124543, 106749, 126109, kit: 355208R91, 354650R91, 354650R92, 354650R93, o-rings: 86977728, 252707R1, 75285739, 350667R1, 353827R1, 86637641, 252739R1, 14457080 Fits IH pump #'s 352035R92, 352035R93, 352035R94, 352035R95 Fits Pesco pump #'s 05 1004 040-02, 05 1004 040-03, 05 1004 040-04, 05 1004 040-05, 05 1004 040-06. If you have an early pump number 352035R91 or (Pesco) 05 1004 040-01 you must also purchase a front seal number 355742R91, available by special order from our technical department. Note: Does not fit 154, 184 or 185. •Includes jam nut and drive key that most kits do not include. •18-piece kit plus instructions •(1) pump mounting gasket (351677R1) •(2) pump manifold to touch control assembly mounting gaskets (352034R2) •(1) pump body quad ring (510185, old # 353828R1) •(2) bearing seal o-rings; 15/16" O.D., 3/4" I.D. x 3/32" thick (86977728, old # 252707R1) •(2) pump manifold front o-rings; 7/8" O.D. x 21/32" I.D. x 7/64" thick (72585739, old # 350667R1) •(2) back-up washers; 15/16" O.D. (355047R1) •(2) bearing seal o-rings; 7/8" O.D. x 3/4" I.D. x 1/16" thick (353827R1) •(1) 3/8"-24 UNF jam nut (124925, old # 114494) •(1) woodruff drive key; # 3, 1/8" x 1/2" (124543, old # 106749) •(1) pin seal (355882R1) •(1) shaft seal o-ring; 11/16" O.D. x 1/2" I.D. x 3/32" thick (86637641, old #'s 252739R1, 14457080) •(2) back-up washers; 7/8" O.D. (355199R1)

IHS3479 $ 26.50 add to cart      

Pesco Hydraulic Pump Gasket, O-Ring and Seal Kit

International / Farmall - Fits: The following using factory Pesco pumps: 100, 130, 140, 200, 230, C, Super A, Super A-1, Super AV, Super AV-1, Super C;

Replaces: kit: 354405R92, Kit: 355207R91, 360691R91, 355405R93, 355405R91 Note: Verify pump # before ordering as there were different pumps used by IHC. Repairs Pesco pump #'s 360689R91, 350707R96, 355007R94, 355370R93. 18 piece kit. Includes:•(1) Gasket 350706R3 •(1) Gasket 350708R2 (sub for 350708R1) •(1) Quad ring G46055 (sub for 353186R1) •(2) O-rings 86553262 (sub for 253070R1) •(2) O-rings 75285739 (sub for 350667R1) •(2) O-rings 353184R1 •(2) O-rings 355202R1 •(2) Washers 355048R1 •(1) O-ring 353836R1 •(1) Woodruff key 124543 (sub for 106749 & 126109) •(1) Jam nut 124925 (sub for 114494) •(1) Pin seal 353185R1 •Used on early pumps only (1) Oil seal 385038R91 (sub for 353183R91) ABC3326

IHS3506 $ 59.95 add to cart      

Thompson Hydraulic Pump Gasket, O-Ring and Seal Kit

International / Farmall - Fits: The following using factory Thompson pumps: 100, 130, 140, 200, 230, C, Super A, Super A-1, Super AV, Super AV-1, Super C;

Replaces: 360957R91 Note: Please verify pump number before ordering. Repairs Thompson pump #'s 360945R91 and 360945R92 hydraulic pumps. 9 piece kit. Includes:•(1) Gasket 350708R2 (sub for 350708R1) •(1) Gasket 350706R3 •(1) Oil seal 385038R91 (sub for 353183R91) ABC3326 •(1) Main body O-ring 510185 (sub 293726R1) •(1) O-ring 352024R2 •(2) O-rings 75285739 (sub for 350667R1) •(1) Woodruff key 126-109 (sub for 106749) •(1) Jam nut 124925 (sub for 114494)

IHS3511 $ 48.35 add to cart      

Pesco Hydraulic Pump Gasket, O-Ring and Seal Kit

International / Farmall - Fits: all using Pesco pump # 368894R91: 240, 330, 340; Replaces: 369783R91: does not include 369782R1 washers Note: Verify pump # before ordering as there were different pumps used by IHC. Repairs Pesco pump # 368894R91. 9 piece kit. Includes:•(1) Gasket 350708R2 (sub for 350708R1) •(1) Quad ring G46055 (sub for 353186R1) •(2) O-rings 511029 (sub for 355965R1) •(2) O-rings 86553262 (sub for 253070R1) •(1) Oil seal 385038R91 (sub for 353183R91) ABC3326 •(1) Woodruff key 126-109 (sub for 106749) •(1) Jam nut 124925 (sub for 114494)

IHS3525 $ 46.75 add to cart      

Touch Control Piston Sleeve Boot

International / Farmall - Fits: C, Cub, Cub Loboy (-(WILL NOT FIT 154, 184, 185)-), Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200;
Replaces: 352005R1, 352005R3, wire: 19526D, 68251D •5-1/2" long •Note: These piston sleeve boots are made of leather and include the wire, just like original.

Touch Control Valve Boot

International / Farmall - Fits: Cub, Cub Loboy (-(WILL NOT FIT 154, 184, 185)-), Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200;

Replaces: 351753R1, 351753R3, wire: 19526D, 68251D •2-1/2" long •Note: These piston sleeve boots are made of leather and include the wire, just like original. •Simplified installation

IHS3508 $ 18.50 add to cart IHS3516 $ 12.95 add to cart

Touch Control Stop

International - Fits: C, Cub, Super A, Super C, 100, 130, 140, 200

WILL NOT FIT 154, 184, 185

Replaces: 350717R91

 

Touch Control Clevis Pin

International - Fits: A1, AV, C, Super A, Super C, 100, 130, 140, 200

Replaces: 350142R1

This pin has a 1/2" diameter. It measures 1-9/16" total length. 1-3/8" usable body length. It has a 3/4" wide head. 2 are used at a time, as many as 6 to 8 can be used per tractor. Sold Individually.

IHS521 $ 13.00 ea. add to cart IHS836 $ 8.75 ea. add to cart

Lift All Control Rod Spring

International - Fits: HV, M, MD, MV, Super H, Super M, Super MD, Super MDV, Farmall: H

Replaces: 15137E

Used for hydraulic lift lever.

Hydraulic Lift Quadrant Lever Friction Disc

International - Fits: H, HV, M, MD, MDV, MTA, MV, Super H, Super M

Replaces: 3044397R1

3" Outside diameter, 7/16" center hole, 0.210" thick.

 

IHS366 $ 12.65 add to cart FDS073 $ 3.50 add to cart

Hydraulic Pump Flange, Port Block, Hydraulic Manifold

International - Fits: Super H, Super W4, 300, 350 (Gas)

3/4" NPT, 15/16" I.D. X 1/8"

Position Control Handle Knob

International - Fits: B-414, 240, 340, 354, 384, 404, 504, 606, Utility: 460

3/8 - 24 fine thread, Hole diameter: 3/8 NF, Width: 1.062", Height: 0.940".

IHS1237 $ 59.95 add to cart IHS780 $ 6.65 add to cart

Hydraulic Position Control Knob

International - Fits: 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro: Hydro 100, Hydro 70, Hydro 86.

Replaces: 382801R1

Hydraulic Remote Handle Knob

International - Fits: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro: Hydro 100

Replaces: 389168R1

0.620" Hole ID

IHS772 $ 9.50 add to cart IHS744 $ 7.45 add to cart

Hydraulic Sensitivity Control Knob

International - Fits: 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro: Hydro 100, Hydro 70, Hydro 86.

Replaces: 382805R1

1/8" WIDE SLOT X 9/16" LONG SLOT

Auxiliary Control Valve Boot

International - Fits: A-I, AV, AV-1, C, Super A, Super C, 100, 130, 140, 200, 230, 240

Replaces: 356790R1

Top .485 I.D., Bottom 1.130 I.D., 1 1/4" compressed length; approx 2" stretched length

IHS774 $ 6.99 add to cart IHS706 $ 29.95 add to cart

Touch Control Valve Boot

International / Farmall - Fits: Cub, Cub Loboy (-(WILL NOT FIT 154, 184, 185)-), Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200;

Replaces: 364832R1, 364832R2 Sold individually. 1 used for Cub, 2 used for all others. Rubber.---2.450" overall length. 1.755" hole diameter one end, 0.725" hole diameter one end. 1.500" boot outside diameter. (Retain to housing with a cable tie/zip tie, not included.)

Touch Control Piston Sleeve Boot

International / Farmall - Fits: C, Cub, Cub Loboy (-(WILL NOT FIT 154, 184, 185)-), Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200;

Replaces: 364833R1, 364833R2 Sold individually. 1 used for Cub, 2 used for all others. Made of rubber. 2.425" overall length. 0.875" hole diameter one end, 0.530" hole diameter one end. 1.235" boot O.D. Must retain to housing with a cable tie or zip tie which is not included.

IHS2020 $ 9.95 add to cart IHS2024 $ 9.95 add to cart

Hydra Touch Handle decal

International - Fits: 240, 340, 460, 560, 660

Replaces: 127741, 369778RI

2" O.D., WHITE LETTERS

CAUTION: INSPECT DECAL BEFORE APPLYING TO TRACTOR. NO REFUNDS ON DECALS IF APPLIED TO SURFACE AND / OR IF DAMAGED. STORE IN A COOL, DRY PLACE. DO NOT SOAK IN WATER.

DEC450 $ 9.65 add to cart      

Farmall H And M Hydraulic Dipstick

International / Farmall - Fits: [ H, HV, M, MD, MDV, MV, Super H, Super HV, Super M, Super MD, Super MDV, Super MV (when equipped with Lift All countershaft driven hydraulic pump) ];

IH Combines - Fits: Combine: 140 (when equipped with Lift All countershaft driven hydraulic pump) IH Miscellaneous - Fits: Windrower: 120 (when equipped with Lift All countershaft driven hydraulic pump

Replaces: 15158EX
Mounts inside the hydraulic pump breather fill pipe. --- 11.800" Long

IHS1440 $ 23.50 add to cart      

view cart
 
Home Page          
Contact Us          

Need Help Ordering Parts?

Call Us:

1-888-839-5778
e mail kuhns@antiquetractorsrus.com


More Tractor Parts. Click Here!

We Have Implement, Equipment and Maintenance Parts For all Makes and Models.