www.antiquetractorsrus.com
Kuhns Equipment Repair, Preserving America's Memories One Tractor at a Time

International Harvester Tractor Parts
Loading
Distributor and Tune Up Parts                                                 view cart
 

New Horizontal Distributor Without Base Or Tachometer Drive

International - Fits: A, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super MTA, Super MV, Super W4, Super W6, T340, T4, T5, T6, W4, W6, W6TA, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 2404, 2424, 2444, 2504, 3444, 3514 (gas or LP), Wheatland: 400, 450 (gas or LP), Crawler: 500, 504 (gas or LP).

IH Combines - Fits: Combine: 64, 76, 91, 93, 105, 203 (gas or LP).

IH Miscellaneous - Fits: Windrower: 161, 163, 201, 275, 375 (gas or LP), Baler: 56T, 56W, 57T, 57W (gas or LP).

WILL NOT FIT CUB, CUB LOBOY, 154, 184, 185

Replaces: 364653R91, 362473R91, 366928R91, 372712R91, 357935R91, 354900R91, 353890R91, 107299C91, 107302C91, 107304C91, 107296C91. Distributor Housing Casting Number: 353898R11

CAST STEEL HOUSING LIKE ORIGINAL! Please note: This cannot be used to replace a magneto by itself. It can replace the magneto if you purchase the distributor drive housing IHS3112, IHS815, (2) IHS2531 & Corresponding coil, For tractors w/o tach drive you will need to buy a cover for the drive hole IHS3125.

IHS1716 $ 294.95 add to cart      

Distributor Drive Housing - To Convert from Magneto - USED

International - Fits: [ A, A1, AV, AV-1, B, BN, C, Cub, Cub Loboy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 504, 2404, 2424, 2444, 2504, 3444, 3514 (Gas/ Lp) ], ID6, ID9, MD, MDV, [ MTA, Super MTA (diesel) ], ODS6, Super MD, Super MDV, Super MDV-TA, Super WD6, Super WD6TA, Super WD9, WD6, WD9, WDR9, [ 400, 600, 650 (Gas/ Lp, Dsl) ], 450 (W450, Gas/ Lp, Dsl), Wheatland: 400 (W400, Gas/ Lp, Dsl), 450 (Gas/ Lp, Dsl). IH Combines - Fits: [ 64, 76, 91, 93, 105, 203 (Gas/ Lp) ]

IH Miscellaneous - Fits: [ Windrower: 161, 163, 201, 275, 375 (Gas/ Lp) ], [ Crawler: 500, T340, T4, T5 (Gas) ], [ Baler: 56T, 56W, 57T, 57W (Gas/ Lp) ], Crawler: T6, T9, TD6, TD9

Replaces: 363763R11, 363749R91

This is a USED distributor drive housing. USE TO CHANGE OVER FROM A MAGNETO, OR TO ADD A TACHOMETER DRIVE TO YOUR TRACTOR.The tachometer drive parts or tach. drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering # IHS3125 block off plate. Use with IHS1716 distributor when replacing a magneto.

IHS3112 $ 58.50 Call For Avalability      

Distributor Drive Gear

International - Fits: A, A-I, AV, B, BN, C, Cub, Cub Loboy, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, OS6, Super A, Super A-1, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super W4, Super W6, Super W6TA, Super WD6, Super WD6TA, Super WD9, Super WDR9, T340, T4, T5, T6, T6-61, T9, TD14, TD14A, TD18, TD6, TD6-61, TD9, TD9-91, U1, U2, U4, U6, U9, UD6, UD9, W4, W6, W6TA (Diesel), W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2504, 3444, Wheatland: 400, 450

Replaces: 353902R1, 531461R91

This is used on the listed models when equipped with IH Distributor 353898R11. Drive pin hole thru both sides like original. 32 Teeth.

IHS766 $ 29.95 add to cart      

Distributor Tach Drive Assembly

International - Fits: Cub, Cub Loboy, 130, 140, 230, 240, 300, 330, 400, 404, 450, 600, 650, 2404 (gas, LP and DSL, must use with #363763R11 cast distributor mounting housing with provision for drive. 340, 424, 444, 2424, 2444 (gas only),350, 504, 2504 (gas and LP only), Wheatland: 400 (W400 gas, LP and DSL), 450, W450 gas, LP and DSL, Industrial: 500 (gas only)

For all models listed with #363763R11 cast distributor mounting housing with provision for drive. ONLY.

Replaces: 369695R1, 369695R91

For IH distributor systems only. Metal Shaft With Nylon Gear. WILL NOT REPLACE ALL NYLON STYLE GEAR/SHAFT #(363816R1) THAT WAS ORIGINAL ON 300, 330, 350, 400, 450, 600, 650.

IHS1905 $ 46.80 add to cart      

Distributor Drive Shaft

International - Fits: A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD18, TD6, TD9, W4, W6, W6TA (Diesel), W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 3444, Wheatland: 400, 450, Cub LoBoy: Cub Loboy

Replaces: 353934R11

This will fit the listed models using IH Distributor 353898R11. This is NOT the shaft that the points contact or the weights attach to. This IS the shaft that will fall out of the distributor if distributor is removed from the tractor, it has a T shape on 1 end to connect into the slotted drive on the engine & (16 splines/teeth) on the other end.

16 teeth

IHS815 $ 28.95 add to cart      

Delco Distributor Shaft Bushing and Shim Kit

International - Fits: A, A-I, A1, AV, AV-1, B, BN, C, H, HV, I4, I6, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, T6, U2, U2A, U4, U6, W4, W6 (with Delco vertical conversion distributor 1111411).

This bushing and shim kit has an 0.486" I.D., 0.656" O.D. and 2.867" length. Must be sized to shaft after installation

Replaces: shim washer: 810074, 810078, washer: 811913, bushing: 1909003, 1952334

ABC3007 $ 22.95 add to cart      

For faster and accurate ordering. Have your Distributor number ready when ordering.
Lucas Distributor Parts:

Distributor Cap for Lucas Distributor

International - Fits: B-250 (fits 'some' with Lucas distributor and BC-144 engines to SN: 6343), [ B-275, B-276 (with Lucas distributor and BC-144 engines to SN: 6343), B-414, 3414 (early models with Lucas distributor and BC-144 engines to SN: 6343).

Replaces: 3047513R1

For threaded spark plug wire ends.

ABC2633 $ 38.75 add to cart      

IH Distributor Parts:

Distributor Cap 4 Cylinder

International - Fits: A, A1, AV, AV-1, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, O4, O6, ODS6, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super MV, Super W6, Super WD9, T340, T4, T5, T6, T9, TD14, TD14A, TD6, TD9, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 3444, Wheatland: 400, 450, Crawler: 500, Cub LoBoy: Cub Loboy

Replaces: 351693R92, S.56918, RTP1949

Fits 353898R11 IH horizontal distributor, Also fits Cub with J4 magneto. Will NOT fit Delco or Prestolite distributor.

ABC121 $ 8.95 add to cart      

Distributor Cap 6 Cylinder

International - Fits: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, Industrial: 2606, 2656, 2706, 2806, 2826, 2856, 3616, 3800, 3850, Hydro: Hydro 70, Hydro 86, Industrial: TD15, TD18, TD18A, TD20, TD24 (SN: 6682 & up).

IH Combines - Fits: Combine: 101, 141, 151, 181, 205, 303, 315, 403, 503, 615, 715.

Replaces: 368062R91

For listed 6 cylinder models, Also fits distributor # 368051R1 and 401107R1.

IHS947 $ 10.65 add to cart      

Distributor Dust Cover

International - Fits: A, AV, AV-1, B, BN, C, Cub, H, HV, I4, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS6, Super A, Super AV-1, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD9, Super WDR9, T340, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD20, TD24 (SN: 6682 & up), TD6, TD9, W4, W6, W9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 3444, 3514, 3616, 3800, 3850, Wheatland: 400, 450, Crawler: 500, Forklift: 4000, Cub LoBoy: Cub Loboy, Hydro: Hydro 70, Hydro 86

Replaces: 384831R91, 353900R11

For the listed models that are using the IH horizontal distributor (353898R11). Please note, this cannot be used on Cub models that have a J4 magneto. Will also fit distributor # 368051R1 & 401107R1.

This distributor dust cover includes the gasket. Will NOT fit Delco or Prestolite distributor.

IHS763 $ 12.50 add to cart      

Delco Distributor Dust Cover

International - Fits: [ 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2514B, 3400A, 3500A, 454, 464, 544, 574, 674 (With Delco distributor and screw held cap).

Delco - Replaces: 1960325

3.300" OD, 1.047" tall, (2) 0.210" screw holes.

Fits Delco distributor with screw held cap only.

 
ABC2428 $ 14.85 add to cart      

Rotor Button

International - Fits: A, AV, AV-1, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS6, Super A, Super AV-1, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD9, Super WDR9, T340, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD20, TD24 (SN: 6682 & up), TD6, TD9, W4, W6, W6TA (Diesel), W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2424, 3444, 3514, 3616, 3850, Wheatland: 400, 450, Crawler: 500, Industrial: 3800, Cub LoBoy: Cub Loboy, Hydro: Hydro 70, Hydro 86

IH Combines - Fits: Combine: 101, 141, 151, 181, 205, 303, 315, 403, 503, 615, 715 ( 6 CYL GAS COMBINES WITH A CLIP HELD CAP).

Replaces: 353896R91

This rotor button will fit the J4 magneto and the IH Horizontal Distributor (353898R11). Also fits Distributors: 368051R1, 401107R1. Will NOT fit Delco or Prestolite distributor.

IHS703 $ 3.95 add to cart      

IH Distributor Cap Spring Clip

International - Fits: A, A1, AV, AV-1, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, O4, O6, ODS6, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super MV, Super W6, Super WD9, T340, T4, T5, T6, T9, TD14, TD14A, TD6, TD9, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 600, 606, 650, 2404, 2424, 2444, 3444, Wheatland: 400, Crawler: 500, Cub LoBoy: Cub Loboy

Replaces: 353894R1, 107384C1

Fits listed IH models when equipped with IH brand distributor 353898R11. Will NOT fit Delco or Prestolite distributor.

2 used per tractor. Sold individually

IHS739 $ 12.50 ea. add to cart      

Distributor Cap Spring Clip Bracket & Screw With Lock Washer

International - Fits: A, A1, AV, AV-1, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, O4, O6, ODS6, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super MV, Super W6, Super WD9, T340, T4, T5, T6, T9, TD14, TD14A, TD18, TD20, TD24 (SN: 6682 & up), TD6, TD9, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2404, 2444, 3514, 3616, 3800, 3850, Wheatland: 400, 450, Crawler: 500, Cub LoBoy: Cub Loboy, Hydro: Hydro 70, Hydro 86, Industrial: TD15

Replaces: 107386C1, SCREW: 121832, BRACKET: 353895R1

FITS: IH BUILT DIST # 353898R11, 368051R1, 401107R1 --- SCREW SIZE: 8-32 X 3/8" SLT RD, HD MACHINE.

2 used per tractor, sold individually.

IHS737 $ 7.50 ea. add to cart      

Insulator For IH Distributor and J4 Magneto

International - Fits: A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, ODS6, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, T340, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD20, TD6, TD9, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 766, 806, 826, 856, 2424, 3444, 3514, 3616, 3800, 3850 (4 cylinder), TD24 (4 cylinder, SN: 6682 & up), W6TA (Diesel, 4 cylinder), Wheatland: IH Combines - Fits: Combine: 101, 141, 151, 181, 205, 303, 315, 403, 503, 615, 715 (4 cylinder)400, 450 (4 cylinder), Crawler: 500 (4 cylinder), Forklift: 4000 (4 cylinder),Hydro: Hydro 70, Hydro 86 (4 cylinder)

Replaces: 353906R1

Also fits distributors: 368051R1, 401107R1, 353898R11. Will also fit J4 magneto (SN: 139748 & up) ***This spring anchor terminal insulator is designed for the IH distributor (353898R11) and for J4 magnetos with a serial number higher than 139748. If you are purchasing this for your J4 magneto, PLEASE make sure to check the serial number of your magneto, as this will NOT work for the earlier models below serial number 139748.

This spring anchor terminal insulator is designed for the IH distributor (353898R11) and for J4 magnetos with a serial number higher than 139748. If you are purchasing this for your J4 magneto, PLEASE make sure to check the serial number of your magneto, as this will NOT work for the earlier models below serial number 139748.

IHS974 $ 4.00 add to cart      

IH Distributor or J4 Magneto Insulating Terminal Washer

International - Fits: A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T340, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD20, TD6, TD9, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 706, 756, 806, 826, 856, 2424, 2656, 2706, 2756, 2806, 2826, 2856, 3444, 3514, 3616, 3800, 3850 (using either a J4 magneto or an IH distributor number 353898R1 or 368051R1 or 401107R1), TD24 (using either a J4 magneto or an IH distributor number 353898R1 or 368051R1 or 401107R1, SN: 6682 & up), W6TA (Diesel, using either a J4 magneto or an IH distributor number 353898R1 or 368051R1 or 401107R1 ), Crawler: 500 (using either a J4 magneto or an IH distributor number 353898R1 or 368051R1 or 401107R1), Forklift: 4000 (using either a J4 magneto or an IH distributor number 353898R1 or 368051R1 or 401107R1), Cub LoBoy: Cub Loboy (using either a J4 magneto or an IH distributor number 353898R1 or 368051R1 or 401107R1), Hydro: Hydro 70, Hydro 86

Replaces: 251538R1

This product is a fiber washer measuring: 0.167" Inside Diameter, 0.563" Outside Diameter and 0.135" Thick. Also fits distributor numbers: 353898R1, 368051R1, 401107R1

IHS1294 $ 3.50 add to cart      

Terminal Screw For IH Distributor or J4 Magneto

International - Fits: A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T340, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD20, TD6, TD9, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 350, 400, 404, 450, 460, 504, 560, 600, 606, 650, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2424, 3444, 3514, 3616, 3800, 3850 (4 cylinder with 6 volt system), TD24 (4 cylinder with 6 volt system, SN: 6682 & up), W6TA (4 cylinder with 6 volt system, Diesel), Wheatland: 400, 450 (4 cylinder with 6 volt system), Crawler: 500 (4 cylinder with 6 volt system), Forklift: 4000 (4 cylinder with 6 volt system), Cub LoBoy: Cub Loboy (4 cylinder with 6 volt system), Hydro: Hydro 70, Hydro 86 (4 cylinder with 6 volt system).

Replaces: 353907R1

This product is a zinc plated Terminal Screw only , If you are purchasing this for your J4 magneto, PLEASE make sure to check the serial number of your magneto, as this will NOT work for the earlier models below serial number 139748. Fits following distributor numbers: 353898R1, 368051R1, 401107R1

IHS988 $ 6.95 add to cart      

IHS846

4 Cylinder Ignition Tune Up Kit IH Distributor Only

International - Fits: A, AV, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super W6TA, Super WD6, Super WD6TA, Super WD9, Super WDR9, T340, T4, T5, T6, T9, TD14, TD14A, TD6, TD9, W4, W6, W9, WD6, WD9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 3444, 3514 (Industrial), Wheatland: 400, 450, Crawler: 500, Cub LoBoy: Cub Loboy

Fits the listed IH models using IH HORIZONTAL distributor number 353898R11. It is designed only for 4 cylinder models with this distributor it WILL NOT fit Delco or Prestolite distributors. The kit includes rotor, point set, condenser.

Point Gap = .020

IHS846 $ 18.75 add to cart      

4 Cylinder Ignition Tune Up Kit IH Distributor Only

International - Fits: A, A1, AV, AV-1, B, BN, C, Cub, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T340, T4, T5, T6, T9, TD14, TD14A, TD6, TD9, W4, W6, W6TA (Diesel), W6TA, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 504, 600, 650, 2404, 2424, 2444, 3444, Wheatland: 400, Crawler: 500, Cub LoBoy: Cub Loboy.

Fits the listed IH models using IH HORIZONTAL distributor number 353898R11. It is designed only for 4 cylinder models with this distributor it WILL NOT fit Delco or Prestolite distributors. The kit includes rotor, point set, condenser and 4 spark plugs.

Point Gap = .020, Plug Gap = 0.25

IHS370 $ 31.35 add to cart      

6 Cylinder Ignition Tune Up Kit IH Distributor Only

International - Fits: 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 3616, Industrial: 3800, 3850, Forklift: 4000, Hydro: Hydro 70, Hydro 86, Industrial: TD14A, TD15, TD18, TD20, TD24 (SN: 6682 & up)

Fits all 6 cylinder models listed. Contains Rotor, Points and Condenser. Will also fit distributor: Also fits distributor: 368051R1, 401107R1.

IHS848 $ 25.90 add to cart      

view cart
 
Home Page          
Contact Us          

Need Help Ordering Parts?

Call Us:

1-888-839-5778
e mail kuhns@antiquetractorsrus.com


More Tractor Parts. Click Here!
Click Here For More Parts
We Have Implement, Equipment and Maintenance Parts For all Makes and Models.