Kuhns Equipment Repair Equipment Repair, Preserving America's Memories One Tractor at a Time

John Deere A at Kuhns Equipment Repair
John Deere Tractor Parts
Loading
Carburetor Floats, Valves and Jets                                          view cart

Please be sure your carburetor numbers match those listed. If not, the parts will not fit your carburetor. Call us if you need help ordering.


Single Induction Carburetor Hardware Kit

John Deere - Fits: A, AN, ANH, AO, AOS, AR, AW, AWH, B, BN, BNH, 50 (up to sn 5015950), 60 (up to sn 6013899)

Replaces: R10060R, R10050R, R10049R, R10067R, R10147R, R10078R, R10163R, R10151R, R10045R, R10041R, 21H971R, 21H962R, 15-223, 21H994R, A258R, AR10075R, A765R, 12H64R

Fits Marvel Schebler #: DLTX67, DLTX71, DLTX72, DLTX73

JETS AND NOZZLES ARE NOT INCLUDED. AVAILABLE SPECIAL ORDER.

KIT CONTAINS: 1 NOZZLE SPRING, 1 DRAIN PETCOCK, 2 FLOAT BEARING SCREWS, 1 HEX PLUG, 1 FUEL LINE CONNECTOR, 1 FLOAT LEVER PIN, 1 ADJUSTING SCREW, 2 THROTTLE BUTTERFLY SCREWS, 2 CHOKE BUTTERFLY SCREWS, 2 LOCKWASHERS FOR THROTTLE BUTTERFLY SCREWS, 2 LOCKWASHERS FOR CHOKE BUTTERFLY SCREWS, 1 WASHER, 2 BOWL VENT BAFFLES, 1 THROTTLE SHAFT HOLE PLUG, 5 PLUGS

JDS909 $ 32.50 add to cart      

Single Induction Carburetor Hardware Kit

John Deere - Fits: A, AN, ANH, AO, AR, AW, AWH, B, BI, BN, BNH, BO, BR, BW, BWH, D, DI, G, GH, GM, GN, GP, GPO, GW

Replaces: R10078R, R10067R, R10050R, R10147R, R10151R, A258R, R10160R, R10049R, R10045R, 21H963R, 21H962R, 21H64R, 21H971R, A765R, R10041R, R10036R, 15-223

Fits Marvel Schebler #: DLTX10, DLTX11, DLTX13, DLTX15, DLTX16, DLTX17, DLTX18, DLTX19, DLTX24, DLTX3, DLTX31, DLTX33, DLTX34, DLTX38, DLTX39, DLTX5, DLTX51, DLTX53, DLTX6, DLTX63, DLTX7, DLTX8

Kit contains: 1 - A258R (Fuel Line Connector), 2 - R10050R (Float Bearing Screws), 1 - AR10075R (Drain Cock), 1 - R10049R (Float Lever Pivot Pin), 1 - R10078R (Spring), 1 - R10160R (Hex Plug), 1 - R10151R (Throttle Shaft Hole Plug), 2 - 21H962R (Choke Butterfly Screws), 2 - A765R (Lock Washer for Choke butterfly screws), 1 - 21H963R (Clamp Screw), 1 - R10036R (Throttle Lever Screw, 1 - R10147R (Washer), 4 - R10067R (Plug), 1 - R10041R (Plug), 1 - 15-223 (Plug), 1 - R10045R (Plug) 2 - 21H964R (Throttle butterfly lock washers), 2 - 21H971R (Throttle butterfly screws)

JDS907 $ 32.50 add to cart      

Carburetor Fuel Strainer Screen, Gasket and O-ring

Fits John Deere - [ A, AH, AI, AN, ANH, AO, AOS, AR, AW, AWH, B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40, G, GH, GM, GN, GW, W111, W113 (using carburetor #'s DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors) ], [ D, DI, GP (Late; using carburetor #'s DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors) ], 50 (all fuel; up to SN: 5015950; using carburetor #'s DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors), 60 (all fuel; up to SN: 6013899; using carburetor #'s DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors); Replaces: Not sold separately from JD •Screen dimensions:◦1.368" O.D. ◦0.458" I.D.

JDS2583 $ 9.50 add to cart      

Carburetor Float (Small Bowl)

John Deere - Fits: L, LA, LI, LUC (power units), 1010

Fits Marvel Schebler #: TSX13, TSX45, TSX60, TSX85, TSX89, TSX90, TSX91, TSX809 & TSX860 9N9550A

Carburetor Float (Large Bowl)

John Deere - Fits: M, MC, MT, 40, 320, 330, 420, 430, 440, 1020, 1520, 2010, 2020, 2030, 2510 & 2520

Fits Marvel Schebler #: TSX245, TSX475, TSX530, TSX562, TSX641, TSX678, TSX688, TSX689, TSX756, TSX808, TSX810, TSX899, TSX904, TSX904SL, TSX905, TSX905, TSX944SL, TSX945SL & TSXU963

ABC036 $ 12.60 add to cart ABC037 $ 19.95 add to cart

Carburetor Float

John Deere - Fits: H

Replaces: OEM AH523R, Marvel Schebler 30-636

Fits Marvel Schebler #: DLTX26, DLTX46

Carburetor Float

John Deere - Fits: A (Early; up to sn 583999), B, D, G, GP

Marvel Schebler - Replaces: 30-635

Fits Marvel Schebler #: DLTX10, DLTX15, DLTX17, DLTX18, DLTX19, DLTX24, DLTX34, DLTX38, DLTX41, DLTX51, DLTX53, DLTX63

JDS598 $ 34.95 add to cart JDS592 $ 23.75 add to cart

Carburetor Float

John Deere - Fits: A (Late; sn 584000 and up), AO, AR, B, 50 (ALL FUEL; up to sn 5015950), 60 (ALL FUEL; up to sn 6013899)

Marvel Schebler - Replaces: 30-700

Fits Marvel Schebler #: DLTX67, DLTX71, DLTX72, DLTX73

Carburetor Float

John Deere - Fits: 50, 60, 70, 520, 530, 620, 630,
720, 730

Marvel Schebler - Replaces: 30-713

Fits Marvel Schebler #: DLTS75, DLTX101, DLTX102, DLTX105, DLTX106, DLTX109U, DLTX81, DLTX82, DLTX83,  DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99

JDS595 $ 32.95 add to cart JDS600 $ 32.50 add to cart

Carburetor Float

John Deere - Fits: 4030, Combine: 6600

Replaces: AH11983, C85-149

Fits Marvel Schebler #: TSX969SL

 

Zenith Carburetor Float

John Deere - Fits: 3010, 3020, 4000, 4010, 4020, Industrial: 500, 600

Replaces: AH10620

Fits Zenith #: 11722A, 13209B, 9685B, 5843, 11316, 11722, 12260, 12305, 12506, 12510, 12557, 12703, 12769, 12777, 12879, 12978, 13101, 13209, 13303, 13320, 13327, 13343, 13429, 13430, 13450, 13478, 13598, 13750, 15108

ABC361 $ 29.95 add to cart ABC1355 $ 22.80 add to cart

Viton Needle Float Valve

John Deere - Fits: A, AI, AN, ANH, AO, AOS, AR, AW, AWH, B, BI, BN, BNH, BO, BR, BW, D, DI, G, GH, GM, GN, GP, GPO, GW (With single induction carburetor), 50 (All fuel with single induction carburetor), 60 (all fuel with single induction carburetor and with stationary engine).

Replaces: C2501R, X2653, AR10113R, AR10077R, 233-574

Fits Marvel Schebler Carb # : DLTX10, DLTX11, DLTX12, DLTX13, DLTX15, DLTX16, DLTX17, DLTX18, DLTX19, DLTX24, DLTX31, DLTX33, DLTX34, DLTX38, DLTX39, DLTX41, DLTX5, DLTX51, DLTX53, DLTX6, DLTX63, DLTX67, DLTX7, DLTX71, DLTX72, DLTX73, DLTX8

JDS1069 $ 9.95 add to cart      

Viton Needle Float Valve

John deere - Fits: L, LA & LI, 1010 (series up to SN #31000).

Replaces: 2333536, TP-233536V

Fits Marvel Schebler Carb # : TSX114, TSX120, TSX154, TSX155, TSX159, TSX188, TSX193, TSX194, TSX228, TSX231, TSX241, TSX241A, TSX241B, TSX241C, TSX248, TSX253, TSX272, TSX28, TSX30, TSX305, TSX308, TSX309, TSX312, TSX33, TSX34, TSX357, TSX36, TSX361, TSX361A, TSX363, TSX38, TSX400, TSX420, TSX421, TSX422, TSX428, TSX43, TSX447, TSX458, TSX470, TSX486, TSX49, TSX497, TSX500, TSX534, TSX541, TSX55, TSX551, TSX577, TSX580, TSX593, TSX597, TSX605, TSX606, TSX62, TSX635, TSX650, TSX663, TSX670, TSX680, TSX683, TSX696, TSX701, TSX706, TSX714, TSX749, TSX765, TSX771, TSX804, TSX815, TSX83, TSX844, TSX879, TSX88, TSX882, TSX936, TSX971, TSX976, TSX987, TSX996

Measures.070" diameter. 3/8"-27 thread

ABC230 $ 6.45 add to cart      

Viton Needle Float Valve

John Deere - Fits: M series, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730 & 2010

Replaces # 233543

   
C3NN9D532A $ 6.15 add to cart      

Viton Needle Float Valve For Marvel Schebler Carburetors

John Deere - Fits: Some: 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 2010, M, MC, MI, MT, MTN, MTW

Replaces: 233-543

DLTX75, DLTX81, DLTX82, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99, TSX104, TSX105, TSX106, TSX11, TSX135, TSX160, TSX162, TSX168, TSX176, TSX181, TSX185, TSX196, TSX216, TSX221, TSX238, TSX245, TSX249, TSX257, TSX259, TSX268, TSX27, TSX27A, TSX303, TSX307, TSX310, TSX332, TSX342, TSX355, TSX360, TSX364, TSX369, TSX373, TSX374, TSX383, TSX384, TSX385, TSX394, TSX396, TSX397, TSX399, TSX413, TSX414, TSX415, TSX436, TSX441, TSX457, TSX464, TSX466, TSX467, TSX475, TSX477, TSX482, TSX485, TSX488, TSX492, TSX499, TSX505, TSX526, TSX530, TSX548, TSX561, TSX591, TSX602, TSX609, TSX610, TSX615, TSX616, TSX62, TSX625, TSX629, TSX633, TSX639, TSX640, TSX644, TSX647, TSX659, TSX662, TSX666, TSX666-01, TSX669, TSX67, TSX677-1, TSX68, TSX685, TSX688, TSX692, TSX695, TSX706, TSX715, TSX726-1, TSX732, TSX734, TSX738, TSX740, TSX755, TSX756, TSX757, TSX759, TSX765, TSX769, TSX771, TSX772, TSX773, TSX774, TSX775, TSX777, TSX779, TSX780, TSX782, TSX783, TSX784, TSX785, TSX786, TSX786-1, TSX788, TSX791, TSX792, TSX794, TSX795, TSX797, TSX798, TSX799, TSX800, TSX805, TSX806, TSX808, TSX81, TSX810, TSX811, TSX813, TSX814, TSX816, TSX817, TSX819, TSX82, TSX821, TSX823, TSX824, TSX825, TSX835, TSX836, TSX837, TSX838, TSX839, TSX840, TSX843, TSX848, TSX852, TSX853, TSX855, TSX868, TSX880, TSX884, TSX900, TSX903, TSX927, TSX93, TSX934, TSX959, TSX97, TSX974, TSX975, TSX977, TSX99

3/8-27 thread, .080 orifice size.

ABC133 $ 6.15 add to cart      

Carburetor Fuel Strainer Assembly with Gasket

John Deere - Fits: A, AH, AI, AN, ANH, AO, AOS, AR, AW, AWH, B, BI, BN, BNH, BO, BR, BW, BW40, BWH, BWH40, G, GH, GM, GN, GW, W111, W113 (using DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors), D, DI, GP (Late; using DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors), 50 (all fuel; up to SN: 5015950; using DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors), 60 (all fuel; up to SN: 6013899; using DLTX 5, 6, 7, 8, 9, 10, 11, 12, 13, 15, 16, 17, 18, 19, 24, 31, 33, 34, 38, 39, 41, 51, 53, 63, 67, 71, 72, 73, 107U, 108U single barrel carburetors).

Replaces: Marvel Schebler #: 67-536, old JD #: X-2462, JD newest #: AR10021

1.640" O.D. cover, steel cover, correct brass bolt with 0.375" tall hex head. NOTE: Steel cover can replace original brass cover on early tractors. Our assembly includes the screen, gasket and steel cover. Additionally, you will receive the correct brass bolt like the original. This is a considerable savings over the OEM.

JDS2579 $ 28.50 add to cart      

Carburetor Elbow And Strainer

John Deere - Fits various models.

Fits: Marvel Schebler Carburetors.

Must have internal threads, used with flare fittings. only. 1/8" NPT screen end. 1/4" flare female end.

Marvel Schebler Carburetor Bowl

John Deere - Fits: 50, 60, 70, 520, 530, 620, 630, 720, 730

Replaces: A5173R, AR10074R, 65-703

Fits Marvel Schebler Carb #: DLTX101, DLTX102, DLTX105, DLTX106, DLTX75, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99

ABC297 $ 7.75 add to cart JDS821 $ 59.97 add to cart

Carburetor Bowl Nut

John Deere - Fits: 50 (including All-Fuel - sn 5015951 and up), 60 (including All-Fuel - sn 6013900 and up), 70 (Gas / All-Fuel), 520, 530, 620, 630, 720, 730.

Fits Marvel Schebler Carb #: DLTX106, DLTX75, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99

All models with Dual Induction Carburetors.

JDS901 $ 14.95 add to cart      

Carburetor Bowl Nut

John Deere - Fits: A, B, D, G, GP, 50 (All fuel only (up to SN: 5015950), 60 (All fuel only (up to SN: 6013899).

 

Carburetor Bowl Nut

John Deere - Fits: G, GH, GM, GN, GW

Replaces: R10155R

Fits Marvel Schebler Carb #: DLTX51

JDS905 $ 12.99 add to cart JDS2682 $ 14.50 add to cart

Carburetor Bowl Nut Spring

John Deere - Fits: A, B, D, G, GP, 50 (All fuel only (up to SN: 5015950), 60 (All fuel only (up to SN: 6013899

Replaces: R10078R

Fits Marvel Schebler Carb #: DLTX16, DLTX18, DLTX19, DLTX24, DLTX33, DLTX53, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73

Main Nozzle Marvel Schebler

John Deere - Fits: M, MC, MI, MT, MTN, MTW, 40

Marvel Schebler - Replaces: 47-288, 47-391

Fits Marvel Schebler Carb #: TSX245, TSX475, TSX530, TSX562

2.257" Overall Length, .528" to end of threads, 1.490" to flange from threaded end. .229" Tube diameter to flange and .210" after flange.

JDS958 $ 4.25 add to cart JDS1056 $ 39.95 add to cart

Main Nozzle Marvel Schebler

John Deere - Fits: 420, 430, 440

Fits Marvel Schebler Carb #: TSX641, TSX688, TSX738, TSX756, TSX791

Marvel Schebler - Replaces: 47-451

2.200" overall length, .536" to end of thread, 1.195" to flange from threaded end, .197" diameter to flange, .209" after flange

Pony Motor Fuel Shut Off Valve

John Deere - Fits: 820 2 cylinder, 70, 80, 720, all with pony motor start.

Replaces: AF2153R, AR1128R

1/8" pipe thread inlet x 3/8" compression outlet.

This shut off is for the carburetor side only.

ABC559 $ 33.95 add to cart JDS1065 $ 26.75 add to cart

Carburetor Main Load Adjustment Needle

John Deere - Fits: M, MC, MI, MT, MTN, MTW, 40, 420, 430, 440

Replaces - Marvel Schebler: 43-134, 43-613

Fits Marvel Schebler Carb #: TSX245, TSX530, TSX688, TSX689, TSX756, TSX768 & TSX777

3/8 x 24 Thread.

Main Load Adjusting Needle Assembly

John Deere - Fits: M, 40, 420, 430, 440

Marvel Schebler - Replaces: 43-699, 43-622, 43-678

Fits Marvel Schebler Carb #: TSX181, TSX221, TSX245, TSX332, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX97

3/8 x 24 Thread. Original style "L" handle.

ABC562 $ 27.35 add to cart JDS1067 $ 69.75 add to cart

Carburetor Main Adjustable Jet

John Deere - Fits: 300, 600B

Marvel Schebler Carburetor #'s TSX181, TSX221, TSX245, TSX296, TSX332, TSX360, TSX374, TSX413, TSX436, TSX475, TSX505, TSX506, TSX530, TSX562, TSX575, TSX582, TSX596, TSX610, TSX633, TSX641, TSX645, TSX678, TSX688, TSX689, TSX713, TSX725, TSX737, TSX738, TSX755. TSX756, TSX768, TSX777, TSX791, TSX792, TSX797, TSX798, TSX799, TSX808, TSX810, TSX816, TSX843, TSX854, TSX856, TSX878, TSX881, TSX883, TSX884, TSX885, TSX886, TSX888, TSX892, TSX894, TSX895. TSX898, TSX899, TSX903, TSX904, TSX905-1, TSX905, TSX907, TSX919, TSX921, TSX922, TSX923, TS928, TSX932, TSX938, TSX941, TSX947, TSXU963, TSX964, TSX965, TSX967, TSX968, TSX945SL

C71-76 $ 49.95 add to cart      

Adjustable Load Nozzle Assembly

John Deere - Fits: 3010, 3020, 4000, 4010, 4020

Fits tractors with 69 series Zenith carburetor and end mounted solenoid or load nozzle.

Replaces: AR46109, R13070, R13069, H21058

Carb Mfg #'s - : 12506, 12510, 12879, 13209, 13320, 13429, 13430

1.965" overall length and 1/2" - 20 Thread Size. This load nozzle is used to eliminate the electronic solenoid.

 

Adjustable Load Needle Assembly

John Deere - Fits: 500, 3010, 3020, 4000, 4010, 4020

Fits tractors with 69 series Zenith carburetor and end mounted solenoid or load nozzle.

Carb Mfg #'s - 12506, 12510, 12879, 13320, 13429, 13430, 13924

This nozzle measures 2.417" overall length and 1/2" - 20 Thread size.

JDS912 $ 49.95 add to cart JDS914 $ 49.95 add to cart

view cart
 
Home Page          
Contact Us          

Need Help Ordering Parts?

Call Us:

1-888-839-5778
e mail kuhns@antiquetractorsrus.com


 

More Tractor Parts. Click Here!
Click Here For More Parts
We Have Implement, Equipment and Maintenance Parts For all Makes and Models.