Antique Minneapolis Moline / B.F. Avery
Tractor Parts

Distributor Cap

Fits Avery: A, BF, V For Auto Light Distributors - O.D. 3-3/8" -- Measure Before Ordering

Distributor Cap
(For Delco Distributor with clip held cap thru 1963)

Fits Minneapolis Moline BF, RTU, Z, GB, GTB, 4 Star, 5 Star, U, UB, UTU, Z, M5, M602, M604 with 4 Cylinder distributor with clip held cap, Also fits Jet Star & Jet Star 3 (Both with Distributor #1112606), Replaces Delco #811735

Distributor Cap
(For 6 Cylinder Delco Distributor with clip held cap thru 1963)

Fits Minneapolis Moline tractors prior to and EXCEPT M670, U302, G1000, G900, G950, G1050 & G1350, Replaces Delco # 824735, MM #19P3031

Dust Cover with Gasket
(For EARLY Delco-Remy Distributor w Clip Held Cap)

Fits Minneapolis Moline with EARLY Delco Distributor prior to and except M670, U302, G1000, G900, G950, G1050, G1350

Distributor Cap (4-Cylinder)
(For LATE Delco Distributor with screw held cap)

Fits Minneapolis Moline M670, U302, Late Jet Star 3 & 3 Star, Replaces #1960833 & MM #10P3022

Distributor Cap 6 Cylinder

Fits MM: G900, G950, G1000, G1050, G135 Dimensions & Notes: FITS LISTED MODELS WITH SCREW HELD CAP Replacement: DELCO: 1960810 --- JD: R11271 --- MF: 1033100MR1 --- OLIVER: 156356AS --- MM: 10P3023

Spring Clip & Longer Bracket

Fits MM: R Series, Z Series, GB, GTB, 2 STAR, 3 STAR, 4 STAR, 5 STAR, U Series, 335, 445, M5, M602, M604, SOME JET STAR 3 Dimensions & Notes: FITS LISTED MODELS WITH DELCO DISTRIBUTOR AND CLIP HELD CAP. CONTAINS ONE SPRING CLIP, ONE BRACKET (LONGER THAN BRACKET IN ABC488S), ONE SCREW AND TWO WASHERS. 31/32" LONG BRACKET ( The Long One Is a Cap Loacator, The Other Is Just A Hold Down For The Clip - One Clip On Distributor Cap Uses One Of Each

Magneto Push-Pull Ignition Switch

Fits Avery: AVERY MODELS Dimensions & Notes: 1 SCREW TYPE TERMINAL --- IN = OFF --- OUT = ON --- FITS MOST MODELS WITH A MAGNETO IGNTION --- NOT ORIGINAL, BUT WORKS GREAT!

Wico Magneto

Fits Avery: A, R, BFDimensions & Notes: WICO MAGNETO --- REPLACES FAIRBANKS MORSE FM SERIES

Magneto Points

Fits Avery: A, R, BF Other Info: FITS: XH894 MAG, XH477B, XH1042 --- WICO "X" SERIES MAGNETORS --- JD WICO R PONY MAGNETOS --- ALSO FITS WICO DISTRIBUTORS WITH THE FOLLOWING NUMBERS: --- XB4001L, XB4023B --- ALSO FITS WICO DISTRIBUTOR MODEL B

Magneto Condenser

Fits Avery: A, R, BF Fits Oliver: OC-3, HG Other Info: XH894, XH477B, XH1042 WICO "X" SERIES, JD WICO R PONY MAGNETOS

Magneto Coil

Fits Avery: A, R, BF Other Info: XH894, XH477B, XH1042 WICO "X" SERIES, JD WICO R PONY MAGNETOS

Magneto Cap

Fits Avery: A, R, BF Other Info: FITS: XH894 MAG

Magneto Rotor

Fits Avery: A, R, BF Other Info: FITS XH894 MAG

Wico Magneto End Cap Gasket

Fits Avery: A, R, BF Other Info: FITS: XH894 MAG, XH477B, XH1042 --- WICO "X" SERIES MAGNETORS --- JD WICO R PONY MAGNETOS --- ALSO FITS WICO DISTRIBUTORS WITH THE FOLLOWING NUMBERS: --- XB4001L, XB4023B

Magneto Service Instructions

Fits MM Dimensions & Notes: A PARTS MANUAL REPRINT IS A REPRINT OF THE MANUAL THAT HAS EXPLODED VIEWS OF ALL PARTS ON THE TRACTOR WITH NUMBERED PICTURES GIVING GREAT DETAIL ON ASSEMBLY AND DISASSEMBLY. IT ALSO GIVES YOU A GUIDE WITH NUMBERS FOR ORDERING PARTS.