Antique White / Oliver Tractor Parts

Top Bearing Steering Shaft Kit

Fits: TE20, TEA20, FE35, TO35 & MF35 Replaces #180563M1 (seat), #180572M1 (spring) & #180528M91 (bearing assy

Steering Sectror Hardware $ Seal Kit

Fits: FE35, 35, 135, 2135, MF20 & 202 (2 used per tractor; Sold individually) (Kit includes: adjuster (allen-head) bolt, nut, washer, o-rings, shims & felt seal)

Bearing Kit
(For Steering Box)

Fits Oliver 55 & 550, WHITE - 2-44 (All with manual steering), Replaces #1L6769 (cones) & #1L6770 (cups) (Kit contains (2) bearings & (2) bearing cups)

Steering Joint with Yoke, Pins & Grease Fitting

Fits Oliver 66, 77, 88 & Supers, (660, 770 & 880), Replaces #KA758 (7/8 inch diameter shaft on both ends)

Slip Fit Coupler
(For Power Steering Conversion)

Fits Oliver models when equipped with Char Lynn Add-On Power Steering

Economy Coupler

Fits Oliver: OLIVER MODELS Other Info: FITS STP P/N IHS554 & IHS555 Dimensions & Notes: USE ONLY IF YOU HAVE A UNIVERSAL JOINT AT ONE END OF EXISTING STEERING SHAFT

Torque Generator
(Standard)

For when pulling a wagon, etc... (Torque Output at 1000 PSI = 7000 inch lbs., Rated Operating Pressure = 1000 PSI, Maximum Operating Speed at 3 GPM = 108 RPM, Recommended Fluid Input = 2.5 to 3 GPM)

Torque Generator
(Heavy Duty)

For when a front loader is used (Torque Output at 1000 PSI = 1100 inch lbs., Rated Operating Pressure = 1000 PSI, Maximum Operating Speed at 3 GPM = 65 RPM, Recommended Fluid Input = 3 to 4 GPM)

Port Block

Needed only if above Torque Generators are purchased

Power Steering Priority Flow Control Valve

Fits Oliver: 66, SUPER 66, 660, 70, 77, SUPER 77, 770, 88, SUPER 88, 880 -- ALL W/ LIVE HYDRAULICS (3/4" INLET & RETURN; 1/2" PRESSURE PORT) Dimensions & Notes: ELIMINATES BELT DRIVEN PUMP, PULLEYS & BRACKETS. ENABLES YOU TO USE YOUR LIVE HYDRAULIC PUMP TO OPERATE THE POWER STEERING. --- MUST BE USED W/ LIVE HYD. --- 3/4" INLET & RETURN --- 1/2" PRESSURE PORT -- PRE SET AT 1500 PSI, ADJUST TO YOUR APPLICATION