 |
 |
 |
 |
 |
Antique White / Oliver Tractor Parts
4 Cylinder Distributor Cap
(For Delco Distributor with clip held cap thru 1963)
Fits Oliver 44, 440, 60, Super 55, 550, 66, Super 66, 660, 77, Super 77, 770, 88, 880, 90, 99, 1800 up to SN #124395 (All 4-Cylinder models), Replaces #H7406
6 Cylinder Distributor Cap
(For Delco Distributor with clip held cap thru 1963)
Fits Oliver Super 55, 550, 66, Super 66, 660, 77, Super 77, 770, 88, Super 88, 880, (1800 up to SN #124395 with Delco-Remy distributor), Replaces Delco # 824735
Distributor Cap With Spring Clips
Fits Oliver: SUPER 44, 440, SUPER 55, 550, 60, 66, SUPER 66, 660, 70, 77, SUPER 77, 770, 88, SUPER 88, 880, 90, 99, EARLY 1800 (UP TO SN 124395) Dimensions & Notes: FITS LISTED MODELS WITH DELCO DISTRIBUTOR AND CLIP HELD CAP. CONTAINS ONE SPRING CLIP, ONE BRACKET (LONGER THAN BRACKET IN ABC488S), ONE SCREW AND TWO WASHERS. 31/32" LONG BRACKET
Distributor Cap
Fits Oliver: LATE 1600, 1800 Dimensions & Notes: FITS LISTED MODELS WITH SCREW HELD CAP Replacement: DELCO: 1960810 --- Oliver 156356AS
Dust Cover with Gasket
(For EARLY Delco-Remy Distributor w Clip Held Cap)
Fits White/Oliver 44, 440, Super 55, 550, 60, 66, Super 66, 660, 70, 77, Super 77, 770, 88, Super 88, 880, 90, 99 & (1800 up to SN #124395), Replaces # H7413
Terminal Insulator Assembly
Fits Oliver: SUPER 44, 440, 60, 66, 70, 77, 88, 90, 99, 900 IND Dimensions & Notes: NOTE: AS DISTRIBUTORS CAN BE CHANGED OVER TIME IT IS BEST TO SEE WHICH STYLE YOU NEED THIS IS JUST A GUIDE OF WHAT WAS ORIGINAL. FITS DISTRIBUTOR HOUSINGS WITH .345 DIAMETER ROUND HOLE IF NOT SURE MEASURE BEFORE ORDERING ROUND WAS THE EARLY STYLE
Terminal Insulator Assembly
Fits Oliver: SUPER 55, 550, SUPER 66, 660, SUPER 77, 770, SUPER 88, 880 SOME 1800 BOTH USING DELCO DIST # 11112603, 1900 Dimensions & Notes: NOTE AS DISTRIBUTORS CAN BE CHANGED THROUGHOUT THE YEARS IT IS BEST TO SEE WHICH STYLE YOU NEED THIS IS JUST A GUIDE OF WHAT WAS ORIGINAL. SQUARE STYLE INSULATOR NOTE: SQUARE WAS THE LATE STYLE FITS DISTRIBUTOR HOUSINGS WITH .300 DIAMETER HOLE WITH A KEYWAY IF NOT SURE MEASURE BEFORE ORDERING
6 Volt Distributor Coil
(Metal Housing & Metal Bracket)
Fits Oliver models with or without external resistance
12 Volt Distributor Coil
Fits Oliver models with or without external resistance
HOT Coil
(55000 Volts)
For 12 Volt systems (Maximum voltage for faster starting, Reduces plug fouling for longer plug life)
Note: Plug Wires for this Part are a NAPA product.
Part number 700172 At your local NAPA Store.
Universal Voltage Resistor
(2 Terminal Style)
Used to reduce voltage from 12 Volt to 6 Volt, Replaces #CR107
TIPS! Answers to the most asked questions on the following Electronic Ignition Conversion Kits:
1. Must use high voltage coils
2. Must use ring terminals only NOT spade terminals
3. Must use automotive style plug wires, NOT copper core
wires
4. Must follow wiring diagram exactly
5. Battery must be right polarity
6. Do NOT use a resistor - even though the wiring diagram
may show it
7. Distributor number must match those listed with your
tractor
- Never change points again.
- Easy installation, no complicated wiring, fits entirely inside distributor.
- Increases spark plug life & horsepower, improves fuel economy.
- Precisely engineered solid state electronics.
- For Distributors with clip type cap
Electronic Ignition Kits
Fits Oliver 44, 55, 60, 66, 99, 550 Delco Distributor #1111716, 1112614, 1112555, 1111530, 1111704, 1111411, 1885555, 1112618
Electronic Ignition Kits
Fits Oliver 77, 88, 99, 770, 880, 1800, 1600 Delco Distributor # 1111702, 1111750, 1112579, 1111731, 1112561, 1112588, 1112587, 1112603, 1112632
Electronic Ignition Kits
Fits Oliver 1650, 1655, 1750 Holley Distributor # 7563-1, 2562-1, 69498
