FDS2976 Basic Engine Overhaul Kit

FDS2976 Basic Engine Overhaul Kit - 0.090" thick sleeves, Standard 3.187" 3-ring pistons FDS2976 Dry Sleeve Installation Guide FDS2976 Dry Sleeve Installation Guide Pg 2 Ford Engine Build Diagram |
|
Item Number: FDS2976
* Whole number only
|
FDS2976 Basic Engine Overhaul Kit Ford - Fits: 2N, 8N, 9N; Replaces: wrist pins: 19A6135A, wrist pin bushings: 21A6207B3, wrist pin locks: 786140, gasket set: 8N6008, pistons: 8N6108B, rings: 8N6149B, sleeve: 8N6055B, 81859181 Basic engine kit includes - (4) 0.090" thick sleeves
- Standard 3.187" 3-ring pistons
- rings and wrist pins
- pin bushings
- complete gasket set
- crankshaft seals
Measure sleeve thickness BEFORE ordering. NOTE: Order rod and main bearings separate to make an out-of-frame- kit, if valve train kit is needed order FDS466. Pin bushings may need sized after installed. WE ARE NOT RESPONSIBLE FOR SLEEVES BROKEN DURING INSTALLATION.
|
ABC209 Block & Hydraulic Drain Plug - 1/4" - 18 NPT
|
FDS001 Ford 8N, 9N, 2N Intake & Exhaust Manifold
|
ABC1878 Brass Manifold Nut and Lock washers - 7/16-20 NF
|
FDS233 Manifold Nut and Washer Kit Nut - (7/16" - 20 UNF)
|
ABC043 Oil Fill Breather Cap - For side mount distributor engines (Distributor is mounted to the right side of engine & generator is mounted on left side)
|
FDS257 Breather Cap With Clip And Copper Filter Element - Exact as Original
|
ABC070 Flywheel Ring Gear - 134 teeth Will not fit Fordson Major and Dexta gas and Dsl
|
ABC049 Oil Level Dipstick
|
JDS500 Oil Fill Breather Cap on Allis and Hydraulic Fill Cap on John Deere's - 1.5" Tall --- includes clip, fits over a 1.5" pipe
|
FDS2970 Basic Engine Overhaul Kit - 0.040" thick sleeves, Standard 3.187" 3-ring pistons, Standard 3.187" 3-ring pistons
|
FDS2092 Piston Ring Set - 3-3/16" bore, (2) 0.093" compression rings, (2) 0.187" oil rings
|
FDS3716 Piston Wrist Pin Bushing - 1.314" overall length
|
FDS2792 Ford Main Bearing Set - 0.010" - w/ 120 C.I. flathead
|
FDS406 Cylinder Head Stud - Fits Ford 2N, 8N, 9N -7/16" DIA X 3" LONG, NC-NF
|
Price: On Back Order, Call for Availability
FDS036 2N, 8N, 9N Cylinder Head - FOR ENGINES WITH FRONT OR SIDE MOUNTED DISTRIBUTORS
|
FDS3527 Adjustable Valve Lifter - fits models listed 1939 through 1952, all with 120 c.i. Flathead engine
|
FDS3726 Wrench Set For Adjustable Valve Lifter
|
FDS2036 Standard Camshaft Timing Gear - 2N, 8N, 9N (with 4 bolt style aluminum cam gear) 44 teeth
|
FDS2038 Crankshaft Gear - Fits Ford 2N, 8N, 9N - 22 teeth
|
ABC021 Crankshaft Pulley - Fits Ford 2N, 8N, 9N
|
FDS364 Oil Pump Relief Valve Spring - Fits Ford 2N, 8N, 9N - Helps to restore oil pressure
|
FDS366 Oil Pump Relief Valve Plunger - Fits Ford 2N, 8N, 9N - Helps to restore oil pressure
|
FDS384 Oil Pump Repair Kit - Fits Ford 2N, 8N (up to sn 247570), 9N
|
FDS381 Oil Pump Repair Kit - Fits Ford 2N, 8N (sn 247571 and up), 9N
|
|
|